Torrey Pines Scientific ST/ HS 5 and 9 Stirring Position Analog Stirrers and Stirring Hot Plates

Each Torrey Pines Scientific hot plate is made with a cast aluminum chassis that is painted with chemically resistant epoxy paint. The chassis is designed to keep spills out of the case. Heating and stirring controls are solid state and are mounted well forward of the heater surface to prevent accidental burns. Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate.

• Heat to 450°C on plate surface in minutes
• Stir from 100–1500 rpm on each stirring position with individual controls
• Plate size on all units is 12” (30.48 cm) x 12”(30.48 cm)
• Solid ceramic heater surface for excellent chemical resistance
• Heater plate mounted in cast aluminum frame that remains cool for safety
• Powerful 1200 watt heaters on hot plate/stirrers
• Fused for safety
• Rugged cast aluminum chassis
• 12-month warranty
• UL, CSA and CE certified

Hot Plate:

• Solid ceramic
• Maximum temperature of the plate surface: Ceramic: 450°C
• Time to maximum temperature, unloaded: 10 minutes
• Temperature control: +/-2.5°C
• Heater power, watts: 1200 watts

Stirrer:

• Speed range unloaded: 100–1500 rpm
• Maximum load, aqueous: HS15 and ST15: 5-800ml beakers; HS19 and ST19: 9-400ml beakers
• Magnet strength: 20 lbs
• Weight capacity on heater surface: Over 50 lbs (22.5 kg)

Electrical:

• Operating voltages available: 100 VAC/50 Hz, 115 VAC/60 Hz, 220 VAC/60 Hz and 230 VAC/50 Hz
• Power consumption: HS15: 1500 watts; HS19: 1700 watts; ST15: 300 watts; ST19: 540 watts
• Current Draw: HS15: 12.5 amps; HS19: 14.5 amps; ST15: 2.5 amps; ST19: 4.5 amps

Additional Information:

• Unit size: 18” deep without line cord plugged in x 12.5” wide x 5.5” high
• Unit Weight, unpacked: HS15 and ST15: 28 lbs (12.7 kg); HS19 and ST19: 38 lbs (17.2 kg)

• Torrey Pines Scientific HS15 and HS19 Datasheet