Phase II PTG-3700 Coating Thickness Gauges

DISCONTINUED ITEM-Recommended Replacement: Phase II PTG-4000 Coating Thickness Gauge

The PHASE II PTG-3500 coating thickness gauge can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.

Testing performance is both non-destructive and extremely accurate.

With this state of the art thickness gauge, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous).

The PTG-3500 utilizes an integrated probe that can automatically detect a Ferrous or Non-Ferrous substrate and comes with 2 substrate samples (steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.

• Large Screen with back-lighting
• Wide Measuring Range
• Advanced Memory
• Browsing and statistics, such as min/max values, averaging and counters
• Includes: 2 substrate samples (steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.

The PTG-3700 coating thickness gauges/paint thickness gauge can be used in many areas of industry including mfg, general engineering, commercial inspection and automotive apps.

• Measuring Range: 0-1000 µ m max. or 0-40 mils
• Resolution: 0.1µ m / 0.1mils(0-99µ m) or 1µ m (over 100µ m)
• Guaranteed tolerance: After one-point calibration: +/- 1-3%n or 2µ m (whichever is greater)
• Display: 4 digits (digit height = 10mm/0.4″)
• Min. measuring area: 0.2″ x 0.2″ (5mm x 5mm)
• Min. radius of curvature: Convex: 0.12″ (3mm); Concave: 1.2″ (30mm)
• Min. substrate thickness: Ferrous: 20 mils (0.5mm); Non-ferrous: 2 mils (50 µ m)
• Calibration: Zero Calibration; Foil calibration
• Max. Surface temperature of test object: 302 degrees F (contact time max is 2 seconds)
• Power source: 4 AA batteries
• Dimensions: 161 x 69 x 32mm
• Weight: 9oz. (260g)