Mountz 145740 HDC40i Hybrid Controller

Flexible system that can replace up to 8 conventional screwdrivers.

• Programmable digital torque setting with memory for 8 preset torque settings.
• Real-time monitoring and torque control of the tightening process.
• Selectable speed up to 1,700 rpm.
• Programming and monitoring with PC software.
• Programmable multi-sequence operation.

• Input (Air Pressure): Min 4.5 Bar (62.26 PSI) / Max 6 Bar (87 PSI)
• Angle Control: 0.1 – 10 turns
• Preset Parameters: Torque, Speed, Soft Start & Angle in 8 preset numbers
• Auto detection of the connected driver: Auto detection of the offset value from the EEProm on the driver
• Error display: Error display by code no. in system, communication & pattern error group
• Fastening Quality Control: OK/NG monitoring of screw fastening by preset pattern of angle and/or time.
• Screw Counter: Save the total screw number, and monitoring the number of OK fastening screws. The controllers can be “Daisy Chained” together for screw counting in a master/slave scenario.
• PC based program for parameter settings, monitoring and real time output
• Input (Electric): AC120VC
• Output (Electric): DC40V, 3A
• Fuse: AC250V 10A
• Dimension (WxLxH): 3 3/4″ x 8 3/4″ x 5″
• Weight: 4.6 lbs
• Preset selection capability: Front panel or 25P I/O

• Mountz HD Series Datasheet.pdf