Chat with us, powered by LiveChat
Manufacturer:

Hioki PW3360 Clamp-On Power Logger

condition: Brand NewPart #: HI-PW3360Availability: Call for Availability
Request Quote

Optional PW3360 Power Quality Kits Include:

  • PW3360 Power Quality Analyzer
  • L9438-53 Voltage Cable Set
  • Hard Carrying Case
  • Z1006 AC Adapter
  • USB Cable
  • Cable Color Markers for Clamp Sensors
  • PW9002 Rechargeable Battery Pack
  • SF1001 PC Software
  • Z4001 2GB SD Card
  • Clamp SensorsNote: At least one optional current sensor is necessary to measure current or power parameters. To store measurement data, use only the guaranteed SD cards sold by HIOKI. 

 

  • Supports single to three-phase, 4-wire circuits
  • Measure up to 780V with a 1000V display range
  • Simultaneously measure up to three single-phase, 2-wire circuits (in the same power system)
  • Broadly applicable for many jobs, including leakage current measurement (An optional clamp-on leakage sensor supports measurements as low as 50 mA)
  • Store months of data on SD cards
  • The QUICK SET function guides you in making the right connections
  • Choose PW3360-21 for harmonic measurements up to the 40th order
Measurement Line & Number of Circuits 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
Measurement Items Voltage/current RMS, voltage/current fundamental wave value, voltage / current fundamental wave phase angle, frequency, voltage waveform peak (absolute value), current waveform peak (absolute value), active/reactive/ apparent power, power factor (lag/lead) or displacement power factor (lag/ lead), active energy (consumption, regeneration), reactive energy (consumption, regeneration), active power demand quantity (consumption, regeneration), reactive power demand quantity (lag/lead), active power demand value (consumption, regeneration), reactive power demand value (lag/lead), power factor demand, energy cost
Pulse input
[PW3360-21 only]: Harmonic (level of voltage/current/power, content ratio, phase angle, total value, THD-F, THD-R), up to 40th order
Voltage Ranges 600 V AC
Current Ranges 500.00 mA to 5.0000 kA AC (depends on current sensor in use),
50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
Power Ranges 300.00 W to 9.0000 MW (Depends on voltage/current combination and measured line type)
Basic Accuracy Voltage : ±0.3% rdg. ±0.1% f.s
Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
Active power : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (at power factor = 1)
Display Update Rate 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
Save Destination SD Memory card, or internal memory at real time
Data Save Interval 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
Save Items Measurement value save: Average only / average, maximum, minimum value
[PW3360-21 only]: Harmonic data save: Average only / average, maximum, minimum value in binary format
Screen copy: BMP form (saved every 5 min. at minimum interval time)
Waveform save: Binary waveform data
Interfaces SD memory card
HTTP server function, remote settings via communication program, data download
USB 2.0: When connected to a PC, the SD Card and internal memory are recognized as removable storage devices, remote settings via communication program, data download
Pulse output: proportional to active power consumption when measuring integral power consumption, Isolated open-collector signal
Functions Connection check, Quick Set navigation guide, clock, pulse input
Power Supply AC adapter Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter)
Battery pack 9459: (DC 7.2 V, 3 VA, charging time 6 hr 10 m), 8 hours of continuous use (with back light off)
Dimensions, mass 180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002
180 mm (7.09 in) W × 100 mm (3.94 in) H × 67.2 mm (2.65 in) D, 830 g (29.3 oz) with PW9002
Supplied  Accessories Voltage cord L9438-53 ×1 set, AC adapter Z1006 ×1, USB cable ×1, Instruction manual ×1, Measurement guide ×1, Color spiral tubes ×1 set: red, yellow, blue/two each, for color-coding clamp sensors, Spiral tubes for grouping clamp sensor cords ×5
Your product has been sucessfully added to the wishlist.
Name: Hioki PW3360 Clamp-On Power Logger
Quantity: 1
Cart Total:
Product has been added to your shopping cart.
Name: Hioki PW3360 Clamp-On Power Logger
Quantity: 1
Cart Total:
Processing...

Create an Account

Already have an account? Login