Hioki IM3533 LCR Meter

New LCR METER Models IM3523, IM3533, and IM3533-01 are extremely cost-effective testers that provide higher performance and better functionality than previous HIOKI models, such as a wide measurement frequency range from 1 mHz (40 Hz for the IM3523) to 200 kHz, high-speed measurement of up to 2 ms, and highly reliable measurement using the contact-check function. Select the best model according to your application - from production lines to research and development.

Note: This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. All probes are constructed with a 1.5D-2V coaxial cable. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.

• ± 0.05% accuracy with wide measurement range (DCR testing, 1mHz to 200kHz, 5mV to 5V, 10uA to 50mA)
• Non-stop testing over mixed measurement conditions such as C-D and ESR at 10 times the speed of previous models
• Built-in low impedance high precision mode effective for testing low inductance or the ESR of aluminum electrolysis capacitance (10x the measurement speed and dramatic improvements in repeatability and stability over the previous model 3522-50)
• Dedicated modes for measuring transformer winding ratio, mutual inductance and temperature compensated DCR
• Frequency sweep testing (IM3533-01 only)
• 2m/4m cable setting in addition to the standard 0m/1mNote: This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. All probes are constructed with a 1.5D-2V coaxial cable. For an RS-232C connection: A crossover cable for interconnection can be used You can use the RS-232C CABLE 9637 without hardware flow control.

• Hioki IM3523_IM3533.pdf