Compliance West HT-3000P-1A AC Hipot Tester, 3000 VAC

The Compliance West HT-3000P-1A AC Hipot Tester is a special use AC only hipot tester. It can deliver up to 1 Amp, with voltage output from 0 to 3000 VAC. The leakage current can be set from 30 - 1000 mA in 10 mA increments in the front panel.

The HT-3000P-1A-AC is a bench-type Dielectric Withstand Tester with AC Output. It features automatic one button operation, with numerous safety features designed to protect the operator.

Not only powerful but safe, the main shutdown switch is strategically located on the front panel. Output voltage, leakage current limit and test duration are controlled from the front panel. Low sensitivity breakdown detect circuit prevents damage for high energy breakdown failures. Made in the USA. Calibration certificate and 1yr warranty included.

• Leakage current up to 1000 mA.
• Microcontroller technologies, one button test, easy to setup, LED’s indicates test in progress. Upon failures buzzer sounds and testing is terminated.
• Output voltage, Leakage current and test duration are controlled in the front panel.
• Test timer is defeatable.
• Zero voltage start included.
• Optional very sensitive breakdown detection circuit.
• One year calibration cycle.
• Main shutdown switch in front panel for safety.

• Voltage Test Type: AC
• Voltage Range: 0-3000 VAC
• Current Range: 30-1000 mA
• Input Voltage Requirements: 240 V, 50 /60 Hz
• Arc Detect: Separate high Frequency circuit
• Leakage Detect: Separate Low frequency circuit
• Test Time Range: 1 – 60 seconds Defeatable
• Voltage Meter Accuracy: ± 2 % ± 1 count
• Current Meter Accuracy: ± 2 % ± 1 count
• Duty cycle: 100%
• Discharge Time: < 1S
• Transformer Output: > 500 VAC
• Display: 4 digits LED display
• Test indicator: Led indicators
• Failure Indicator: Led indicators and buzzer
• Programable: No
• PLC Interface: No
• TestLink: No
• Testminder: No
• Test Defeat: Test time
• Operation Temperature: 15 – 40 °C
• Relative Humidity Range: 0 – 90 % Non-condensing
• Dimensions : 24″ wide x 4-30″ high x 23″ deep
• Weight: 160 Lbs
• Calibration: One year calibration Certificate

• Compliance West HT-3000PAC-1A Datasheet.pdf