Compliance West HT-2000P AC Output/Ground Continuity Hipot Tester, 2000 VAC

DISCONTINUED ITEM-Replacement Model: Compliance West HT-2000S AC Output/Ground Continuity Hipot Tester, 2000 VAC

The Compliance West HT-2000P AC Output/Ground Continuity Hipot Tester is a production line hipot tester that generates up to 2000V at 20mA. The HT-2000P adds precision leakage current and test time setup and viewing to the popular HT-2000 model. Performs both dielectric withstand and ground continuity production line tests required by UL and CSA. Ideal for general purpose production-line testing of electrical, medical and other low primary-to-ground capacitance products. Easy to use equipment connections allow you to plug your equipment right into the NEMA plug on the front panel. One button starts the testing: GREEN light indicates PASS--RED light and a buzzer leave no question if a failure has occurred, making the Compliance West HT-2000 AC Output/Ground Continuity Hipot Tester the most user-friendly AC hipot/continuity tester on the market today.

• Adds high precision leakage current and duration settings to the user-friendly HT-2000 for better control of tests.
• Allows no load setup of leakage current and test dwell times.
• Once entered, leakage current and test dwell times can be referenced on the front panel display at any time.
• Leakage currents can be set from 1-20mA in 0.1mA increments.
• Dwell times can be set from 1-60 seconds in 1 second increments.
• Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
• Small and light. 9.25″ wide x 4.25″ high x 10″ deep. 11 lbs. But rugged enough to test manufactured housing.
• Ground continuity check is defeatable for testing two-wire products.
• Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
• J2 and J3 cords allow connection of pigtail power leads.
• Simple test outcome judgement. Green lights mean pass – red lights mean fail. Failing tests sound a buzzer as well.
• Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
• Operation Instructions are printed on the rear panel for easy reference.
• In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
  RED lights and a buzzer leave no question if a failure has occurred.
• Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
• Optional 120kohm calibration resistor can be mounted on the rear panel.
• Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1.

• Output : 2000V/20mA +0 – 10%.
• Current limit and test time set without HV output
• True arc detection via high frequency transformer
• Buzzer, lamp upon fail
• Optional PLC Interface
• Continuity Test
• Test status with lights
• Failure for Continuity, Leakage Current, Arc Detect
• NEMA Plug
• Calibration Certificate Included
• Shipping weight 14 lbs.
• Enclosure size 9″ wide x 4-3/4″ high x 10″ deep
• Meter Accuracy: ±2% 500V-Full scale (see accuracy graph)
• Leakage Current Setting: 1-20mA in 0.1mA increments, using LED meter
• Voltage Ramp Time: User adjustable 1-5 sec.
• Test Time: 1-60 Sec in 1 sec increments, using LED meter
• Duty cycle: Continuous
• Discharge Time: immediate
• Test Adjustments: Tamperproof by removing knob
• Input Power Requirements: 114-127Vac 50/60Hz

• Compliance West HT-2000P User Manual Rev 5.1.pdf
• Compliance West HT-2000P Datasheet.pdf