Compliance West HT-10KVP-AC Hipot Tester, 10000 VAC

Compliance West HT-10000P-AC Hipot Tester/ Dielectric Tester with microcontroller technology for ease of use. AC output 0-10,000Vac @ 10mA. Ships complete with cables, manual, and Calibration Certificate.

The dielectric withstand test is a test which is recognized by safety agencies worldwide as a valid criterion of safe assembly of end-use equipment. The HT-10000P is designed as a research instrument to determine the dielectric properties of component assemblies of end-use equipment. It applies a highvoltage potential between Output and Return test leads and monitors Leakage Current and watches for Dielectric Breakdown during the test. To aid in testing, the HT-10000P can be configured with or without voltage ramp time, with or without a test duration timer, and can be set to deliver high voltage after an arc has been detected to pinpoint an area of arcing.

• HT10000P AC: AC output to 10000 Volts. Delivers 1 through 8 milliamps. Custom outputs to 25 mA.
• Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates. Test termination defeatable by switch on rear panel. Provided with arc detection circuit to properly detect hipot failures.
• Rear panel adjustments; leakage limit, ramp time, test time and voltage.
• Ergonomic design for safety and ease of use.
• High voltage output jack.
• Automatic voltage ramp-down circuit eliminates residual voltage.
• Designed for product development and laboratory use.
• High efficiency design, low power consumption.
• All test leads included.
• Calibrated to NIST standards.
• 1 year warranty
• HTT-1 and HTT-1RHipot and Ground Continuity Function Checker Compatible

• Voltage Test Type: AC
• Voltage Range: 0-10000 VAC
• Current Range: 8 mA
• Input Voltage Requirements: 108-132 V, 50 /60 Hz, 2A max
• Fuse Requirements: 120 VAC
• Arc Detect: Separate high Frequency circuit
• Leakage Detect: Separate Low frequency circuit
• Ground Continuity: N/A
• Ground Continuity Current: N/A
• Test Time Range: 1 – 60 seconds
• Ramp time Range: 1 – 5 Seconds
• Voltage Meter Accuracy: ± 2 %
• Current Meter Accuracy: ±0.1 mA
• Resistance measure Range: N/A
• Resistance auto offset Range: N/A
• Resistance Measure Accuracy: N/A
• HV shutdown by Ground Fail: N/A
• Duty cycle: 100%
• Discharge Time (Resistive Load) Transformer Output: < 500 VAC
• Pass/Fail Repeatability: ± 3 %
• Output Connector: High Voltage Jack
• Display: 4 digits LED display
• Test indicator: Led indicators
• Failure Indicator: Led indicators and buzzer
• Programable: No
• PLC Interface: No
• TestLink: N/A
• Testminder: No
• Voltage Hold on failure: Available
• Top Mounted handle: No
• Test Defeat: Ramp Time, Test Time and Breakdown Fail
• Autoreset: on Pass Optional
• Operation Temperature: 15 – 40 °C
• Relative Humidity Range: 0 – 90 % Non-condensing
• Dimensions: 10″ wide x 5″ high x 12″ deep
• Weight: 17.5 Lb
• Calibration: One year calibration Certificate
• Test Cords: Return lead, High Voltage Test Lead, Power cord
• HTS/Schedule B: 9030.39.0100
• ECCN: 3B992
• What is in the box: Return lead, High Voltage Test Lead, Power cord

• Compliance West HT-10000P AC Datasheet.pdf
• Compliance West HT-10000P User Manual.pdf