Agilent/ HP 10020A Resistive Divider Probe Kit

The Agilent 10020A Resistive Divider Probe Kit is a signal probing system for measuring fast-transition-time signals in high-impedance systems. It is designed for use with 50 Ω input oscilloscopes, but may be used with other than 50 Ω systems if a 50 Ω feedthrough termination such as the Agilent 10100C, is used.

The Agilent 10240B Blocking Capacitor is a probing accessessory that provides ac-coupling while maintaining a 50 ohm system. This capacitor is designed for use with the model 10020A Resistive Divider Kit, but may be used with any probe that must be terminated in 50 ohms.

• Low input RC provides high-fidelity probing of fast-transition signals
• The Agilent 10218A BNC Adapter allows the Resistive Divider to be connected to a BNC connector
• Use of the Agilent 10240B Blocking Capacitor provides ac-coupling at the divider output
• A spanner tip provides a very short ground lead, which reduces ringing in high-frequency probing
• A special probe handle fits over the short vinyl tip for convenient use
• Output Connector: BNC
• Length (overall): Approximately 1.2 m (4 ft)
• Weight: Net 0.45 kg (1 lb)