AEMC K110 (2111.73) DC/AC MicroProbes 450mA, 10mV/mA

The DC/AC Microprobe Model K110 measures as low as 100µA AC or DC. The unit has proportional mV output for direct readings on DMMs. The high accuracy K110 is ideal for calibration of current loop process instruments (e.g., 4 to 20mA or 0 to 20mA).

•  Measures extremely low level DC from 100µA
• Outputs signal proportional to total current (DC + AC)
• Low noise
• Ultra-compact size and non-contact clamp-on convenience
• Simple plug-in operation
• Designed for use with DMMs and oscilloscopes
• Accurate display of waveforms
• No range or mode (AC/DC) switching required
• Extended battery life
• Red LED indicated momentary or continuous overload
• Green LED indicates power and battery condition

• Industrial process controls (4 to 20mA current loops)
• Electronic circuit design, testing and repair
• Automobile wiring and engine control systems
• Avionics systems maintenance and repair
• Fault and signal location in complex networks
• Ground and leakage current measurement
• Pre-deployment testing of power-conscious equipment

• Nominal Range :  0 to 300mArms/0 to ±450mAdc
• Measurement Range : 0 to ±450mA
• Output Signal  : 10mV/mA
• Accuracy (450mA Range)
•                                         AC : ±0.8% of Reading ± 200μA
•                                         DC : ±0.5% of Reading ± 150μA
• Overload Red : LED indicates momentary or continuous overload
• Frequency Range : DC to 1.5kHz (@ -3dB sine)
• L oad Impedance : 200Ω
• Working/Common
• Mode Voltage     : 300V, EN 61010-1, Cat. II
• Battery : 9V Alkaline, NEDA 1604, 6LR61 or IEC 6 LF22
•               :(Approx. 20 hours life)
• Output Termination 4mm Safety Banana Plugs
• Operating Temperature -14° to 131°F (-10° to 55°C)
• Storage Temperature -40° to 176°F (-40° to 80°C)
• Operating Relative
• Humidity <95% @ ≤ 35°C, 75% @ 55°C
• Zero Adjustment ±25mA approx. by 10 turn knob at base of case
• Maximum Conductor Size 3/16″, 0.180″ (4.5mm)
• Dimensions Probe: 4.4 x 0.6 x 1.0″ (111 x 15 x 25mm); Electronic Module: 4.9 x 2.5 x 1.1″ (124 x 64 x 28mm)
• Weight 9 oz (250g)

• AEMC K110 Data Sheet.pdf