AEMC K100 (1200.67) DC/AC MicroProbes 4.5A, 1mV/mA

The DC/AC Microprobe Model K100 measures as low as 100µAAC or DC. The unit has proportional mV output for direct readings on DMMs, loggers and oscilloscopes.

• Measures extremely low level DC from 100mA
• Outputs signal proportional to total current (DC + AC)
• Low noise
• Ultra-compact size and non-contact clamp-on convenience
• Simple plug-in operation
• Designed for use with DMMs and oscilloscopes
• Accurate display of waveforms
• No range or mode (AC/DC) switching required
• Extended battery life
• Red LED indicated momentary or continuous overload
• Green LED indicates power and battery condition

•  Industrial process controls (4 to 20mA current loops)
• Electronic circuit design, testing and repair
• Automobile wiring and engine control systems
• Avionics systems maintenance and repair
• Shipboard maintenance and repair
• Fault and signal location in complex networks
• Ground and leakage current measurement
• Pre-deployment testing of power-conscious equipment

• Nominal Range : 0 to 3Arms/0 to 4.5Adc
• Measurement Range : 0 to ±4.5A
• Output Signal : <100μV, DC to 3kHz
• Accuracy (4.5A Range)
•                                    AC : ±2.0% of Reading ± 200μA
•                                   DC : ±1% of Reading ± 200μA
• Overload : Red LED indicates momentary or continuous overload
• Frequency Range : DC to 2kHz (@ -3dB sine)
• L oad Impedance : 200Ω
• Working/Common
• Mode Voltage : 300V, EN 61010-1, Cat. II
• Battery  : 9V Alkaline, NEDA 1604, 6LR61 or IEC 6 LF22
•                : (Approx. 20 hours life)
• Output Termination : 4mm Safety Banana Plugs
• Operating Temperature :  -14° to 131°F (-10° to 55°C)
• Storage Temperature :  -40° to 176°F (-40° to 80°C)
• Operating Relative
• Humidity  : <95% @ ≤ 35°C, 75% @ 55°C
• Zero Adjustment : ±25mA approx. by 10 turn knob at base of case
• Maximum Conductor Size : 3/16″, 0.180″ (4.5mm)
• Dimensions : Probe: 4.4 x 0.6 x 1.0″ (111 x 15 x 25mm); Electronic Module: 4.9 x 2.5 x 1.1″ (124 x 64 x 28mm)
• Weight : 9 oz (250g)
• Electrical : EN 61010-2-32
• Double Insulation : Yes
• CE Mark : Yes

• AEMC K100 Data Sheet.pdf