AEMC 514 (2117.70) AC/DC Clamp-On Meter TRMS: 1000A, 750VAC/1000VDC

The Clamp-On Meter Model 514 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 514 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.

The Model 514 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function. The Model 514 also uses Hall sensor technology that provides both DC and AC current measurements to 1000A.

The Model 514 is sized for a comfortable, one-handed operation. This model is True RMS sensing responding to distorded signal electrical systems. The jaw opening for the Model 514 is 1.575" (40mm).

• Standard size, full function clamp-on meter
• 1000AAC/DC current measurements
• 750VAC/1000VDC volt measurements
• TRMS measurements
• Resistance measurement to 4000Ω
• Continuity with beeper below 40Ω
• Frequency measurements from V and A
• Diode test
• 1ms Peak function for fast capture of signals
• Hold function to “freeze” readings
• Push-button for easy ADC zeroing
• Large easy-to-read 4000-count display
• 42-segment analog bargraph
• Includes test leads and soft carrying case

• Commercial, industrial, residential and HVAC troubleshooting
• Power panel, junction box and battery bank monitoring
• AC or DC motor testing
• Power plant troubleshooting
• Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers

• Digital Display: 33/4 digits LCD display, 4000-count (max. reading 3999)
• Analog Display: Fast 42-segment analog bargraph display
• Symbol and Scale Range: Automatic according to range and input signal
• Polarity: Displayed when negative signal applied to input
• Overload: Displayed when input signal exceeds range
• Sample Rate: 2 samples/sec for the digital display, 20 samples/sec for the analog bargraph
• Power Supply: 9V, NEDA 1604 or 6F22 or 006P
• Auto-Off: 30 minutes
• Low Power Indication: Displayed when the battery is below the required voltage
• Jaw Opening Size Ø: 1.575″ (40mm) – faciliates 750MCM cable or two 500MCM cables
• Dimension: 9.53 x 2.60 x 1.42″ (242 x 66 x 36mm)
• Weight: 14.10 oz (400g) with batteries
• Altitude: 2167 ft (2000m) max.
• Operating Temperature: 511/512: 32° to 104°F (0° to 40°C), <80% RH, non-condensing 514: -14° to 122°F (-25 to 50°C), 80% RH, non-condensing*
• Storage Temperature: -14° to 140°F (-25° to 60°C), < 80% RH, battery removed
• Pollution Degree: 2
• Safety Rating: EN 61010, 600V, CAT III, EN 61010, 1000V, CAT II
• CE Mark: Yes

• AEMC 512_514 Datasheet.pdf