Shimpo DT-209X Contact/Non-Contact Data Collecting Laser Tachometer
Condition: Brand New
Shimpo Instruments has set the standard for quality, reliability, efficient design and ease of use with our lightweight metal construction, handheld contact/non-contact laser tachometers. Recognized worldwide, our tachometers have an unlimited range of industrial and laboratory uses. Applications include Input/output shaft speed, belt, fan speed, total length and flash rate; from propeller speed to wire or yarn/filament speed, pulp and paper mills to blood centrifuges. Other common uses: Measuring shaft speed; Measuring conveyor belt speed; Calibration (comparing speeds to verify that panel mounts are reading correctly); Measure linear speed Measure distance (length).
Features:
- Measuring Range (Non-contact): 6 - 99,999 rpm
- Measuring Range (Contact): 0.8 - 25,000 rpm
- Accuracy: ±1 rpm: 6 - 8,300 rpm / ±2 rpm: 8,301 - 25,000 rpm / ±0.006 % of reading / ±1 digit (or 7 rpm max.): 25,001 - 99,999 rpm
- Display 5: digit 0.47””(12 mm) high LCD
- Measuring Unit: rpm: (Non Contact up to 14’ away) Contact: ypm, mPM, fpm, ipm and Length; yd, m, ft, in, linear rate and length: using contact adapter included and 6” or 12” circumference wheels.
- Measuring Mode: USB mode; PC online measuring / standard (STD) mode; Standard measuring / Average (AVE) mode; Average data measuring
- Memory: STD mode; 24 blocks, 10 points/block (Total; 240 data) AVE mode; 30 blocks (Last, Max, Min, Average data in each block) Date and hour of start/finish are stored in each block. (Can download data with USB communication.)
- USB communication: USB 1.1
- Display Update Time: 1 second (typical)
- Detection: Laser diode
- System Control: Single-chip C-MOS microprocessor
- Over Range Indicator: Flashing numerals
- Voltage Requirement: 2 AA / 1.5 V Batteries
- Low Battery Indicator: Flashing ”LO BAT” display
- Auto Power Shut-Off: Yes (except USB mode)
- Battery Life: 15 hrs Approx.
- Operating Environment: Non-corrosive
- Operating Temperature Range: 32° - 113°F (0 - 45°C)
- Construction: Die-cast aluminum housing
- Weight: DT-209X: 0.9 pound (400g)
- Dimensions: 6.6””L x 2.4””W x 1.8””H (167.5 mm x 60 mm x 46 mm)
- Warranty: 1 year
- Complete with: Reflective tape, 2 cone adapters, 1 funnel adapter, 1 3-1/2” Extension shaft, NIST certificate, Master Wheel (6” cir.) and 200L adapter, USB cable, Master Wheel (6” cir.), and Application software
- DT-209X-S12: same as above DT-209X with 12" wheel (CD-R)
|
|