My Account
View Cart
View Quotes
Contact Us
   
Home | About Calright | Products | Ordering & Shipping | Customer Service | Repair Service | Sell Your Equipment




Amplifiers
Analyzers
Anemometer/ Airflow
Battery Measurement
Calibrators / Standards
Clamp-On Meters
Counters, Frequency
Electrical Test
Fiber Optic / Lightwave
Force Gauges & Force Stands
Function Generators
Gloss Meters
Light Meters
Meters / Multimeters
Hipot / Ground Testers
Indoor Air Quality (IAQ)
Insulation & Earth Testers
Miscellaneous
Moisture Meters
Network Analyzers
Oscilloscopes
Particle Counter
Phase Rotation & Motor Testers
Porosity Detectors
Power Quality
Power Supplies / AC Sources / Electronic Loads
Pressure
Pulse Generators
RF / Microwave
Scales
Signal Generators
Sound Level Meters
Spectrum Analyzers
Stopwatches/ Timers
Tachometers / Stroboscopes
Telecom / Datacom
Temperature & Humidity
Thermal Imaging
Vibration Meters
Video


Practical Instrument Model 535 4-20 & 10-50 mA/Voltage Dual Range Calibrator

Condition: Brand New


Practical Instrument Electronics (PIE) Model 535 brings you the features of the original Model 532 for 10-50 milliamp process loops. On power up you can select either 4-20 or 10–50 mA ranges. The EZ-Dial™ knob and EZ-Check™ switch are all that's needed to make quick adjustments or set 0% or 100% of full scale. The EZ-Step™ button provides one-handed stepping. Designed in collaboration with nuclear plants, the PIE Model 535 includes automatic stepping and ramping modes which allow hands-free testing and calibration of the process loop with HIGH accuracy and repeatability. The model 535 also offers the optional analog output of 10mV/mA proportional output for connection to chart recorders and data loggers.

Features:

  • True ± 0.025% of reading
  • Read and Source 0.000 to 50.000 mA
  • Display current or -25.00 to 125.00% of 4-20mA or 10-50mA
  • Bar graph displays % of 4-20mA or 10-50 mA
  • Read 0.00 to 60.00 volts with 2X over range ability
  • Simulate 2-Wire Transmitters
  • Power 2-Wire Transmitters and Read 0.000-50.000mA
  • Read 0.00 to ± 30.00 VDC with 4X over range ability
  • Source 0.000 to 24.000 VDC with up to 20mA output
  • Direct Calibration 1.000V to 5.000V
  • Loop Compliance Voltage = 43 Volts
  • OPTIONAL ANALOG OUTPUT for chart recorders & Data loggers
  • Auto Step or Ramp with HIGH accuracy and repeatability designed in collaboration with Nuclear plants
  • Selectable step sizes, time in-between steps & soak time
  • Stop watch like EZ-Check™ switch
  • Full 5 Digit Display
  • Fuseless protection from accidental connection to 240 volts AC/DC
  • Rugged handheld enclosure with optional lanyard and Velcro® hand strap
  • Uses 4 AA alkaline batteries
  • Superior battery life of 40 hours under typical continuous usage
  • Easy access to battery compartment
  • AC adaptor, carrying case, and Test Data available
  • NIST Traceable Test Data, A/C Adaptor, and Carrying Case included FREE
  • NIST Traceable Calibration Certificate included FREE
Stock Number:  PIE-535


View Specification Sheet (PDF - 0.42 MB)


Qty:    



Home | About Calright | Products | Ordering & Shipping | Customer Service | Sell Your Equipment
Repair Service | My Account | View Cart | View Quotes | Contact Us | Site Map
Privacy Policy | Terms of Use | Terms and Conditions of Sale

Copyright© 2004 by Calright Instruments, All Rights Reserved
Web Site by Regency Web Services, Inc.

  Web Site v2.0 (Build 3.7) (10/22/2007 11:46 AM) / Ready-Flex-Go v1.5 (Build 0.80)