 |
|
|
|
|
|
|
|
Haefely Technology PESD 3010, 30kV Electrostatic Discharge Generator
Condition: Brand New
Bringing dissimilar insulation materials together and then parting them creates electrostatic charges. The resultant electrostatic discharge (ESD) can cause failures in electronic circuits.
There are many standards which require discharge component (Resistor & Capacitor) values other than those described in the IEC/EN 61000-4-2 standard. With PESD 3010 it is possible to meet these requirements due to the changeable R&C modules
PESD 3010 features a unique no contact detection circuit. During contact discharge tests, PESD 3010 continuously monitors if ESD pulses are really discharged to the EUT (Equipment under Test). In case of no contact to the EUT, the operator receives a warning message in the LCD display. This prevents the user from potentially wrong test results.PESD 3010 has a highly ergonomic design. This includes a firm handle that insures safe and comfortable operation under any circumstances, and dedicated, large conventional pushbuttons for easy and convenient setting of all test parameters.
For long running tests, a screw socket on the bottom enables to mount the gun on a standard tripod.
IEC test level L1 to L4 are predefined and are shown in the LCD together with the test voltage.
Capacitor modules for the PESD 3010 are available with any value in the range from 50pF to 1000pF and Resistor modules with any value in the range from 50 ohms to 5000 ohms, in any combination ensuring maximum flexibility.
 
Features:
- 30kV Air discharge
- 30kV Contact discharge
- User selectable R&C networks
- Unique integrated self test function
- Contact discharge current flow detection
- Remote trigger input
- Slow repetition rates for Automotive testing
- Flexible System- PESD 3010 is a modular design that enables users to meet many different test specifications with maximum cost effectiveness.
- Efficiency and Reliability- The integrated self test function verifies all the relevant functions of the ESD generator at the push of a button within 30 seconds
- Comfortable to use- The lightweight, balanced weight distribution and ergonomic handle design mean that testing can be performed over long periods without operators becoming fatigued.
- Complete with: carrying case, control and power supply unit, ground cable, test finger air discharge, test finger contact discharge, polarity module, capacitor module 150 pF IEC 61000-4-2, Resistor module 330 Ohm IEC 61000-4-2, and user manual
| Stock Number: |
HAE-PESD3010
|
|
View Specification Sheet (PDF - 0.15 MB)
|
|
|
 |