 |
|
|
|
|
|
|
|
Torrey Pines Scientific HP51 Large Capacity Digital Hot Plate, 115VAC, Ceramic Top
Condition: Brand New
The EchoTherm HP51 is a product of years of experience in design, manufacturing, and marketing of digital hot plates. That experience was focused into the design of these units with the goal of making them the easiest to use and most accurate fully featured hot plates in the world. They are so simple to use it is surprising. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100-ohm platinum RTD sensor and measurement system. Calibration of temperature is electronic and stored in memory. Calibration is set at the factory but can be done easily in the field using the probe calibration kit offered as an accessory.
Heater tops are ceramic glass or milled flat cast aluminum. The ceramic glass tops are a brilliant white flat glass set in a cast aluminum frame that are easy to clean and impervious to chemical spills. The ceramic glass is different than the cast plate with curved sides used by other manufacturers. These cast tops may have stress in them from the molding process and have been known to fracture when heated or put under stress by their mounting clips. The flat glass top of the Torrey Pines Scientific units eliminates this stress. Mounting them in a cast aluminum frame gives the additional advantage of a cool edge to the heating surface to help prevent accidental burns. The glass tops have efficient 1400-watt heaters that can raise the plate surface temperature to 450°C in just a couple of minutes. The cast aluminum tops are flat to within 0.01 inches corner to corner and have 1400-watt heaters that can raise the plate surface to 400°C in under ten minutes.
The chassis is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability. All units come complete with a six-foot long, three wire grounded, detachable line cord, fuse holder, and main ON-OFF switch. Both are fused for safety.
Features:
- Extremely easy use by anyone in your lab
- Two memory buttons for storing your favorite settings for instant, one-button recall and use
- Platinum RTD temperature measurement for precision and accuracy
- Solid ceramic heater top for quick heating on a flat, white, chemically reisistant surface. Milled flat cast aluminum top also available.
- Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
- PID temperature control for exact, tight sample control of plate or solution
- Timer to 99 hours, 59 minutes, 59 seconds with settable Auto-Off for exactly timed sample preparation
- Electronic calibration stored in chip. No batteries to replace. User calibratible
- 12” (30.48cm) ceramic glass or aluminum tops
- Full featured digital display for checking all parameters instantly
- Fused for safety
- ETL, CSA, and CE certified
- Dimensions: 12.5" (31.75 cm) side to side, 17.0" (43.18 cm) front to back, 4.5" (11.43 cm) high
- Complete with a six-foot long, three wire grounded, detachable line cord, fuse holder, and main ON-OFF switch
| Stock Number: |
TP-HP51
|
| Shipping Weight: |
20 lb
|
|
|
|
|
 |