The Agilent 53152A is a full-featured 46 GHz CW microwave counter plus power meter that is perfectly suited for bench top or ATE environments, yet is tough enough to handle the most rugged field applications.

The 11715A AM/FM test source provides very flat, wide-bandwidth, and low-distortion amplitude - or frequency-modulated RF signals.

The 11792A sensor module gives you all the performance of the 8902S system, plus superb power measurement accuracy, at a single connector.

The 11793A microwave converter downconverts microwave signals to the frequency range of the 8902A measuring receiver.

The 355C dc to 1000 MHz manual step attenuator provides precision step attenuation in 1 dB steps from 0 to 12 dB.

The 355D, dc to 1000 MHz, manual step attenuator provides precision step attenuation in 10 dB steps from 0 to 120 dB.

The 355E programmable step attenuator provides precision step attenuation in 1 dB steps from 0 to 12 dB.

The 355F programmable step attenuator provides precision step attenuation in 10 dB steps from 0 to 120 dB.

The 435B power meter is an analog power meter, compatible with the entire series of 8480 power sensors.

The 436A power meter is a general-purpose digital power meter intended for manual and automatic radio-frequency (RF) and microwave-power measurements.

The 437B power meter is a low-cost, high-performance, single-channel, programmable, average power meter compatible with the 8480 family of power sensors.

The 438A power meter is a dual-channel power meter designed specifically for ATE systems.

The 478A provides high efficiency and good radio frequency (RF) match.

The 8471E is a low-cost, planar-doped barrier detector offering excellent performance from 10 MHz to 12 GHz. It has an SMA male input connector and an SMC male output connector.

The 84811A peak power sensor works with the 8900C/D power meters to measure the peak power of RF pulses.

The 8481A thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The 8481B thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The 8481D diode power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The 8481H thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The 8482A thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The 8482B thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The 8482H thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The Agilent 8483A thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The Agilent 8485A thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The Agilent 8485D diode power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The 8487A thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x power meters, and provides extraordinary accuracy and stability.

The 85024A high-frequency probe makes it easy to perform in-circuit measurements.

The 8900C power meter directly displays the peak power of RF pulses over a 100 MHz to 18 GHz frequency range.

The 8900D power meter directly displays the peak power of RF pulses over a 100 MHz to 18 GHz frequency range.

The 8901A modulation analyzer combines the capabilities of several RF instruments to give complete, accurate characterization of modulated signals in the 150 kHz to 1300 MHz frequency range.

The 8901B modulation analyzer combines the capabilities of several RF instruments to give complete, accurate characterization of modulated signals in the 150 kHz to 1300 MHz frequency range.

The 8902A measuring receiver delivers the accuracy and resolution of a high performance power meter.

The 89441A covers baseband through RF frequencies of DC to 2.65 GHz in scalar and vector analysis modes.

The E4418A is a low-cost, high-performance, single-channel, programmable power meter.

The E4418B power meter is designed for bench and automatic test equipment (ATE) use.

The E4419A is a low-cost, high-performance, dual-channel, programmable power meter.

The E4419B power meter is designed for bench and automatic test equipment (ATE) use.

The NC6000 Series noise generating instruments are designed for applications on the test bench, or in test stations in which an NC6000 Series unit is incorporated with other equipment that provides a wide variety of functions.