Horiba B-771 LAQUAtwin Conductivity Meter, 0 to 19.9mS/cm

DISCONTINUED ITEM- Recommended Replacement: Horiba EC11 Conductivity Meter, 2 to 19.99 ms/cm

Determine water conductivity with as little as 0.12 mL of sample.

The conductivity of rain water is a trusted guide to determining atmospheric purity. In agriculture, measuring the conductivity of soil allows farmers and agronomists to determine optimum fertilizer usage and check the ‘health’ of soil after salt water damage. The LAQUAtwin meter makes conductivity testing simple, anywhere.

• Accurate reading from only a single drop, in a few seconds
• Calibrate and measure at the touch of a button – the Smiley face will tell you when the result can be read
• LAQUAtwin is fully waterproof and dustproof (IP67 rated)
• Carry case comes standard for handy portability
• Includes: Meter, electrode, 4mL 1.41mS/cm standard and case

• Fresh water testing (rain, rivers, lakes, hot springs)
• Aquaria
• Soil testing for improved agriculture and analysis of salt water damage
• Analysis of surface cleanliness prior to coating and improved paint adhesion.

• Measurement Range: 0 to 19.9mS/cm (0 to 1.99S/m)
• Display Range: 0 to 199mS/cm (0 to 1.99S/m)
• Operating temperature/humidity: 5˚C to 40˚C, 85% relative humidity max. (no condensation)
• LCD: 4-digit digital LCD display
• Power: CR2032 batteries (x2)
• Waterproof Standard: IP67 (No failure when submerged in water at a depth of 1 meter for 30 minutes. The meter cannot be used underwater.)
• Auto power OFF: 15 minutes
• Battery life : More than 100 hours continuous operation
• Outer dimensions: 165mm × 29mm × 19mm (excluding projections)
• Mass: Approx. 52 g (including sensor and batteries)
• Material: ABS epoxy(main material)
• Operation buttons: 3 buttons (power, calibration, measurement)
• Measurement principle: 2 AC bipolar
• Minimum Sample Volume: 0.12mL

• Horiba B-700 Series Datasheet.pdf