AEMC 1045 (2116.93) Digital/Analog Megohmmeter: 1000V, 2G Ohm

DISCONTINUED ITEM-Replacement Models: AEMC 6522 (2155.51) Megohmmeter: 1000V, 40G Ohm
AEMC 6524 (2155.52) Megohmmeter: 1000V, 200G Ohm
AEMC 6526 (2155.53) Megohmmeter: 1000V, 200G Ohm with Bluetooth

The Megohmmeter Model 1045 is a battery powered digital insulation resistance tester. It is designed to measure insulation resistance, continuity, voltage and to measure resistance. The Model 1045 tests are 250, 500 and 1000V. It incorporates a 600V voltmeter which automatically detects and accurately displays AC/DC voltages in the test circuit on each of the insulation test voltage ranges. Above 25V it also provides and audible an visual signal, and inhibits further tests, thus protecting the user and the meter.

An exceptionally large digital/analog multi-function display provides clear and easy readings enhanced by a bright blue electroluminscent backlight. The Model 1045 incorporates a timer function which allows the user to operate the unit hands free for the duration of the test or until the button is pressed again. The megohmmeter will beep automatically at 30sec, 60sec and 10 minutes to remind the user to record measurements.

The1045 is also available in kit form.  The 1045 Megohmmeter Field Kit includes a Model 1045 megohmmeter, field case, two color-coded leads, black test probe, two alligator clips, remote test probe, batteries and user manual. The Remote Test Probe (with target light) is used for all measurements. The yellow button on the probe button is used the same way as the button on the instruments. The test voltage is generated when the button is pushed. 

• True Megohmmeter^®
• Test voltage combinations of 250V, 500V and 1000V
• Insulation measurements to 2000MΩ (2GΩ)
• Automatic test inhibition if live sample >25V
• Automatic discharge for operator safety
• Resistance measurements to 400kΩ
• Continuity measurements with 200mA test current
• Alarm indication
• Timer function for easy DAR and PI measurements
• Over-molded slip-proof holster for rugged field use
• Supplied with a soft carrying case and test leads

• Motor insulation resistance measurements
• Continuity checks
• Low resistance measurement
• Test industrial commercial wiring & motor control centers
• Test motors (AC & DC)
• Test transformers
• Dielectric Absorption Ratio and Polarization Index measurements

• Short Circuit Current : ≤3mA
• Accuracy <40MΩ : ±3% of Reading ± 5cts
• Accuracy >40MΩ: ±3% of Reading ± 2cts
• Voltage Test/Safety Check :  0 to 600VAC/DC
• Voltage Warning Indicator : >25V
• Test Inhibition : Yes >25V
• Measurement Range : 0.0 to 400kΩ
• Test Voltage : 7 to 9V
• Test Current : 600μA
• Accuracy : >4kΩ  ±3% of Reading ± 1ct
• Display Size : 2 x 3″ (54.3 x 73mm)
• Digital Display : 4000-count
• Analog Bargraph : 34-segments
• Backlight : Blue Electroluminescent
• Power Source : 6 x 1.5V AA (NEDA 15A) Capable of performing >3500 5 sec tests
• Dimensions : 8.30 x 4.25 x 2.36″ (211 x 108 x 60mm)
• Weight : 1.81 lbs (830g)
• Temperature Range : Operating: 14° to 131°F (-10° to 55°C); Storage: -40° to 158°F (-40° to 70°C)
• Safety Rating : EN 61010-1-1, 300V Cat. II, EN 61557
• CE Mark : Yes; UL Listed

• AEMC 1040 and 1045 Data Sheet.pdf